Belt Connector

Identifier: Mechanics.Mechanics2D.ConnectorRol
Version: 3.9
Variables: Variables to be transferred between belt drives element and Belt Connection    
  Strand Angle computed by Pulley or Drum Models gamIn
  Strand Angle computed by Belt Models gamOut
  Uncoiled Belt Length transferred by Belt Models rolLenIn
  Uncoiled Belt Length computed by Pulley or Drum Models rolLenOut
  Belt Mass Part m


The Belt Connector is the interface between a Pulley or Drum or Belt model and a Belt Connection. The connector interfaces strand angle, uncoiled belt length, and mass part of the free belt section.

(See also figure 6 in chapter Pulleys and Drums.)